IN-LINE GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER
VOLTAGE : 50 to 1000 Volts
CURRENT: 25 Amperes
KBJ2508
Öncəki məhsul
BY500/1000 1000V 5A
Qiyməti görmək üçün giriş edin
Sonrakı məhsul
D25XB60
Qiyməti görmək üçün giriş edin
Qiyməti görmək üçün giriş edin
Tələs, Sadəcə 5 əd qaldı.
Qısaca:
Plastic material has Underwriters Laboratory
Flammability Classification 94V-O
• Ideal for printed circuit board
• Reliable low cost construction utilizing molded plastic technique
• Surge overload rating : 400 Amperes
• High temperature soldering guaranteed : 260oC/10 seconds/.375”(9.5mm) lead length at 5 lbs.(2.3kg) tension
• Pb free product are available : 99% Sn above can meet Rohs environment
substance directive request
VOLTAGE : 50 to 1000 Volts
CURRENT: 25 Amperes
Əlavə məlumat
| Vəziyyəti | İşlənmiş |
|---|---|
| Diod | Körpü diod |
Rəylər (0)
İlk nəzərdən keçirin “KBJ2508”
Əlaqədar məhsullar
D25XB60
Qısaca:
Glass Passivated Die Construction
·
High Case Dielectric Strength of 1500V
RMS
·
Low Reverse Leakage Current
·
Surge Overload Rating to 350A Peak
·
Ideal for Printed Circuit Board Applications
·
Plastic Material – UL Flammability
Classification 94V-0
Case: Molded Plastic
·
Terminals: Plated Leads, Solderable per
MIL-STD-202, Method 208
·
Polarity: Molded on Body
·
Mounting: Through Hole for #6 Screw
·
Mounting Torque: 5.0 in-lbs Maximum
·
Weight: 6.6 grams (approx)
·
Marking: Type Number
RVB-2506
Qısaca:
600V/25A GLASS PASSIVATED BRIDGE RECTIFIER
VOID FREE VACUUM DIE SOLDERING FOR MAXIMUM
MECHANICAL STRENGTH AND HEAT DISSIPATION
(Solder Voids: Typical < 2%, Max. < 10% of Die Area)
Case:
Terminals: Silver plated pins
Soldering: Per MIL-STD 750
Polarity: Marked on case
Mounting Position: Any
Mounting torque = 8 in lb max.
Weight: 0.26 Ounces (7 Grams)
D15XB60
Qısaca:
Glass Passivated Die Construction
·
High Case Dielectric Strength of 1500VRMS
·
Low Reverse Leakage Current
·
Surge Overload Rating to 240A Peak
·
Ideal for Printed Circuit Board Applications
·
Plastic Material – UL Flammability
Classification 94V-0
Case: Molded Plastic
·
Terminals: Plated Leads, Solderable per
MIL-STD-202, Method 208
·
Polarity: Molded on Body
·
Mounting: Through Hole for #6 Screw
·
Mounting Torque: 5.0 in-lbs Maximum
·
Weight: 6.6 grams (approx)
·
Marking: Type Number
Hələ rəy yoxdur.